Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel

Cx-Apex I - Stainless Damascus and 316L stainless steel

Regular price $499.99

Shipping calculated at checkout.

Carbon Shaving Co. is proud to offer the Cx-Apex line. We plan to offer this one periodically. Every Damascus piece is unique, like a fingerprint, no two are alike. We pair a stainless steel Damascus cap(grades 304 & 316 stainless steel) with a 316L, marine grade stainless steel base plate and handle.

Material:

  • Stainless steel Damascus (Grades 304/316) cap with 316L Stainless Steel base plate and handle. Collectors/Gift box included.
Finish:
  • The cap is individually etched, hand sanded and polished.
  • Each pattern is unique, no 2 are the same
  • The base plate and handle are a high polish
  • High Polish/Damascus Finish - Some machine marks are visible. Some scratches also exist. These can be seen under the cap, on critical dimensions and when magnified.

Technical Specifications:

  • ~90 grams total weight
  • Your choice of base plate, we will reach out to ask you which plate you would like prior to shipping, see further notes below of base plate options*
  • Positive blade exposure
  • 92 mm handle length (3.6 inches) - 13 mm handle diameter (.5 inches)

Maintenance:

  • We recommend keeping your razor clean, remove blade, use a soft tooth brush with dish soap and water to gently clean your razor. Pad dry your razor thoroughly after with a paper towel. Air drying is also OK.
  • Periodically we also recommend gently boiling your razor in water for 20 minutes, followed by a 10 minute soaking in alcohol to disinfect your razor.

*Base Plate Options:

  • All base plates have positive blade exposure
  • Your choice of a base plate, see base plate notes below:

Original Base Plate -  This was our first design configuration, what makes this plate unique is the added blade exposure. It’s still my personal favorite and has a .68mm with positive blade exposure. This design offers a lot of user control with the positive blade exposure. For a milder shave, you can change the angle or “ride the cap” for sensitive parts like the neck. For other areas, you can still have a good amount of efficiency.

- Base Plate -  This is our newest base plate. If you have sensitive skin, prefer less blade feel, have fine hair or just enjoy a mild shave, this is the one. Head shavers have enjoyed this one. This plate has our least blade exposure and a .71mm blade gap.

+ Base Plate -  We reduced the blade exposure from the original but increased the gap to .88mm. This is a nice option if you prefer less blade feel, yet still enjoy a higher efficiency in a razor. This plate is also a nice option if you only shave every 2-3 days...

++ Base Plate -  This one is for those who like a very efficient option. This plate is still with positive blade exposure, but has less exposure than the + Base Plate. This razor has a larger 1.08mm gap. If you have thick hair and shave every 4-5 days or just like an efficient razor, this would be the one.


Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel
Cx-Apex I - Stainless Damascus and 316L stainless steel